Self Cleaning Filter Type Centrifuge Diesel Purifier
Product Overviews
Model PDSD14000 separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong
engine life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small
amount of solid particle from liquid.
The machine adopts automatic control, and has the advantages of high efficiency, low oil consumption, convenient
operation and economic maintenance cost.
The clear oil and dirty water are pumped out by centripetal pump, the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed. After accurate dynamic balancing, it can run for long time
with low vibration, safety and security.
The design, product and acceptance are conformed to the standard of GB/T5745 “Marine Disc Separator”.
Principle&Structure
Advantages
Moisture sensor(No-gravity ring) technology is adopted to ensure the quality of the oil after separation.
Bowl with full hydraulic structure brings more thorough slag discharge, more stable and reliable performance.
The new type seamless belt drive(No second tensioning required) brings more reliable structure and more simplified mechanical structure.
High rotating speed ensure the best separation effect.
Our separator is with low power consumption and light weight, which is in accordance with the requirements of the national industry.
Technical parameters
1. Separator single machine
Model
PDSD14000
Rated capacity
L/h
14000 (0# diesel)
Bowl rotating speed
rpm
7800
Output pressure of clear oil
Mpa
≤0.2
Output pressure of sewage
Mpa
≤0.3
Motor power
kW
11-15
Weight(special tools included)
kg
730
Full volume of the slag cavity
L
2
Discharge Type
Variable discharge
Type of output
Centripetal pump
Dimension of single machine
L × W × H (mm)
1200*810*1225
Condition for mineral oil separation and actual capacity(refer to the chart)
Oil types
Fuel oil
Lubrication oil
Steam turbine oil
Fuel oil
Heavy fuel oil
SAE30, 40
Detergence oil
Kinematical viscosity
(mm²/s)
1.9-
5.5
5.5-
24
120
180
380
100-120
61.2-74.8
40℃
50℃
40℃
40℃
Density
(kg/m³)(20℃)
< 900
900-991
880-900
< 900
Separating temperature
(℃)
Normal temperature,
40-60 best
90-98
80-95
Recommended capacity
(L/h)
17500
14000
7700~
8400
6300~
7000
4900~
5600
7000~
8400
3500~4200
11200~11900
If you have special requirement, please connect with us.
Value analyisi
1. According to the requirements of each classification society, all modules are equipped with oil leak alarm and
high temperature alarm.
2. Oil hydraulic,pneumatic control part adopts the Brand BURKERT (Germany).
3. Heater adopts brand SWEP (Germany).
4. Pressure control adopts Korean products or WIKA products
5. Screw pump is used instead of gear pump.
6. All equipped with automatic temperature control device (Made by the RTK production in Germany or made in China)
7. The main electrical components of standard electrical control box are produced by Schneider company while PLC is
produced by Mitsubishi.
8. The complete sets referred above are all Peony’s production of automaticStandard Controls and we certainly can
modify the configuration list according to customers’ specified requirements.
